Anyway, without further ado - the "tin" ceiling. After painting the walls and making sure they were fully dry I taped off the walls with blue painters tape. In hindsight I wish I'd used that new Frog tape (the green stuff) as I did get a little feathering of the metallic paint onto the walls. Once the walls were taped I proceeded to cut in around the entire ceiling using a 2" brush. And then I rolled the first coat of metallic paint on using a 6" roller with a pretty thick nap to get into all the crevices. This did cause some splatter and I know I ended up with little "sprinkles" of silver paint on my face (in my hair, on the toilet, the sink, you get the idea).
Here's a picture of the cutting in process:
The first coat seemed to take forever and due to the sheen of the metallic paint it was really hard to tell where white ceiling tile was showing and where it wasn't. You can see in the pictures below how spotty the coverage looks.
I put two coats of the silver metallic paint on to get the coverage I wanted. This just so happened to be two jars of the Martha Stewart Living MSL Metallic Polished Silver paint.
These two pictures really show how the silver paint makes the ceiling POP.
All that's left is to put up some final pictures and give you a final cost breakdown. That's coming up in an upcoming post. I promise it will come sooner rather than later.